Industry Leaders in Non-Destructive Testing, Metallurgy & NDT Calibrations

Classes

MAGNETIC PARTICLE – COMBINED LEVEL I & II

Magnetic Particle, Combined Level I & II training includes basic theory and encompasses both dry powder and wet fluorescent inspections.  Proper use of hand yokes, permanent magnets, and stationary units is covered. This course meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements. All classroom materials, including the ASNT student […]

LIQUID PENETRANT – COMBINED LEVEL I & II

Liquid Penetrant, Combined Level I & II training includes basic theory and encompasses both visible and fluorescent inspection methods.  Students will have the ability to gain practical experience with Methods A, B, C, and D testing. This course meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements. All classroom materials, […]

RADIOGRAPHY – LEVEL II

Radiography Level II training includes further understanding of radiation exposures, film uses and processing, and practical operational experience. Radiography Level I training is a pre-requisite for this course. The course meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements.  All classroom materials, including the ASNT student package with a study guide […]

RADIOGRAPHY – LEVEL I

Radiography Level I training includes basic theory of X and gamma radiography, safe practices and operation of equipment, and practical operational experience. The course meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements.  All classroom materials, including the ASNT student package with a study guide and a handbook, are provided. Class will […]

ULTRASONIC – LEVEL II

Ultrasonic Level II training includes review of basic principles, application of contact and non-contact inspection, and practical applications. Ultrasonic Level I training is a prerequisite for this course. The course meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements.  All classroom materials, including the ASNT student package with a study guide […]

ULTRASONIC – LEVEL I

Ultrasonic Level I training includes basic principles; equipment operation and calibration; and hands-on exercises. The course meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements.  All classroom materials, including the ASNT student package with a study guide and a handbook, are provided. Class will be held at the ATS offices and consists […]

MAGNETIC PARTICLE – COMBINED LEVEL I & II

Magnetic Particle, Combined Level I & II training includes basic theory and encompasses both dry powder and wet fluorescent inspections.  Proper use of hand yokes, permanent magnets, and stationary units is covered. This course meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements. All classroom materials, including the ASNT student […]

Liquid Penetrant – Level I & II Combined

Class will be held at the ATS offices and consist of 32 hours of classroom training (Monday through Thursday) and a testing day on Friday. Meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements. All classroom materials, including the ASNT student package with study guide and handbook, are provided. Class […]

Radiation Safety (IRRSP)

This class is a requirement for anyone using radiograph equipment seeking IRRSP (Industrial Radiography Radiation Safety Personnel) certification or re-certification. The curriculum is structured following the guidelines for safety measurements mandated by state codes.  This course is a prerequisite to the state examination. Class hours are: Monday through Friday, 8:00 AM – 4:00 PM Cost […]

Magnetic Particle – Level I & II Combined

Class will be held at the ATS offices and consist of 32 hours of classroom training (Monday through Thursday) and a testing day on Friday. Meets all SNT-TC-1A (Society for Non-Destructive Testing) and NAS 410 (National Aerospace Standards) requirements. All classroom materials, including the ASNT student package with study guide and handbook, are provided. Class […]