Industry Leaders in Non-Destructive Testing, Metallurgy & NDT Calibrations

Blog

THANKS MORAINE!

In August, ATS was honored to receive a Neighborhood Beautification Award from the City of Moraine in recognition of all the exterior improvements made to our facility prior to our 10 Year Anniversary Open House held in June.  The entire project was conceived, implemented, and managed by Paul Drerup – from painting to awnings to […]

SPOTS FILLING QUICKLY – MAGNETIC PARTICLE CLASS

There is still time to register for the Magnetic Particle Level I & Level II combined class to be held at the ATS offices September 17 – 21.  But don’t wait – spots are filling quickly! This five (5) day class is taught by Chris Small, ATS President and Level III.  The course meets the […]

ADVANCED MANUFACTURING TECHNOLOGY SHOW

When:  October 24, 9:00 AM – 7:00 PM and October 25, 8:00 AM – 6:00 PM Where:  Dayton Airport Expo Center Is it in your calendar?  It should be!  As we celebrate our 10 year anniversary, ATS is proud to be an exhibitor at AMTS again this year! The Dayton Region continues to grow into […]

Start Your Job Off Right

You’re in a hurry. You have to get a job processed as quickly as possible.  Your customer wanted his order yesterday.  It still has to go through testing.  To save some time, you decide to just skip the paperwork. Not so fast! Including clear and concise information on a purchase order can alleviate a lot […]

GOOD EATS IN DAYTON – El Meson

If you know Chris Small, you know he is a big guy with a big appetite!  Chris loves eating out at the many great locally owned restaurants and pubs in the Miami Valley.  Each month he’ll share one of his favorites with you. El Meson – 903 East Dixie Drive, Dayton, OH  45449 – www.elmeson.net […]

GET TO KNOW THE ATS STAFF – Nathaniel Reveal

Nathaniel Reveal joined our technical staff in July 2009 following five years of service in the United States Marine Corps where he performed aviation structural repair and non-destructive testing.  Nat’s primary focus is Ultrasonic testing and working with our 6-axis immersion tank system.  He is also currently serving as Project Manager for our Phase II […]

ADVANCED MANUFACTURING TECHNOLOGY SHOW

The Advanced Manufacturing Technology Show is the region’s ONLY annual show of its kind.  Come see the future of the industry, where the latest technologies, trends, products, and solutions are showcased.  Join frontline manufacturing movers and shakers for unbeatable networking opportunities.  Visit www.DaytonAMTS.com to pre-register for Express Check-In. When:  October 24, 9:00 AM – 7:00 […]

REGISTER NOW – MAGNETIC PARTICLE CLASS

Magnetic Particle Level I and Level II combined class will be held September 17 – 21 at the ATS offices.  This five (5) day class meets the requirements of ASNT-TC-1A and NAS 410.  All course materials are provided. Level II refresher training and Level II retesting are also available during this class. To register or to get […]

DOES PACKAGING REALLY PAY OFF?

When it comes to packaging parts, we’ve seen it all.  Parts that are too large or too heavy for a cardboard box – yet they are still in a box, sides smashed and the bottom giving out.  Parts that are loosely stacked on top of each other, sometimes machined parts with finished surfaces against each other.  Skids of parts that are not banded […]

GOOD EATS IN DAYTON – Dublin Pub

If you know Chris Small, you know his is a big guy with a big appetite!  Chris loves eating out at the many great locally owned restaurants and pubs in the Miami Valley.  Each month he’ll share one of his favorites with you. DUBLIN PUB – 300 Wayne Avenue, Dayton, OH  45410 – www.dubpub.com Anchoring one end […]